Parkinson Cowan Freezer SANTO K 18 User Manual

SANTO K 9 18 40-5 i  
User Manual  
Fridge Freezer  
 
Contents  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Shelf holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Starting up and temperature regulation . . . . . . . . . . . . . . . . . . . . . . . .7  
Interior Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Storage shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Variable Inner Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Freezing and storing frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Preparation of Ice Cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Switching off the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Something Not Working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Your appliance needs air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Housing dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Reversing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Inner door reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Housing dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Instructions for building-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
3
 
Safety  
Please read this instruction book before using the appliance and retain for  
future reference. These warnings are provided in the interests of your safe-  
ty, ensure you understand them fully before using the appliance.  
Intended use  
• The appliance is intended for use in the home. It is suitable for the coo-  
ling, freezing and storing of frozen food, as well as for making ice. If the  
appliance is used for purposes other than those intended or used incor-  
rectly, no liability can be accepted by the manufacturer for any damage  
that may be caused.  
• Alterations or changes to the appliance are not permitted for reasons of  
safety.  
Prior to initial start–up  
• Check the appliance for transport damage. Under no circumstance should  
a damaged appliance be plugged in! In the event of damage, please con-  
tact your retailer.  
Refrigerant  
The refrigerant isobutane (R600a) is contained within the refrigerant circuit  
of the appliance, a natural gas with a high level of environmental compat-  
ibility, which is nevertheless flammable.  
• During transportation and installation of the appliance, be certain that  
none of the components of the refrigerant circuit become damaged.  
• If the refrigerant circuit should become damaged:  
– avoid open flames and sources of ignition;  
– thoroughly ventilate the room in which the appliance is situated.  
Safety of children  
• Keep packaging material away from children.  
• Please make old appliances unusable prior to disposal. Pull out the mains  
plug, cut off the mains cable and remove any locks or catches, to prevent  
young children being trapped inside.  
• Do not allow children to tamper with the controls or play with the product.  
• This appliance is not intended for use by persons (including children) with  
reduced physical, sensory or mental capabilities, or lack of experience and  
knowledge, unless they have been given supervision or instruction con-  
cerning use of the appliance by a person responsible for their safety. Chil-  
dren should be supervised to ensure that they do not play with the  
appliance.  
4
 
Daily Operation  
• Containers with flammable gases or liquids can leak at low temperatures.  
There is a risk of an explosion! Do not store any containers with flamma-  
ble materials such as, spray cans, fire extinguisher refill cartridges etc in  
the refrigerator/freezer.  
• Bottles and cans must not be placed in the freezer compartment. They can  
burst when the contents freeze, high carbonate content drinks can even  
explode! Never store lemonade, juices, beer, wine, sparkling wine etc. in  
the freezer compartment.  
• Ice cream or ice cubes can cause “frost/freezer” burns if consumed strai-  
ght from the freezer.  
• Do not touch frozen food with wet hands. Your hands could stick to the  
food.  
• Do not operate any electrical appliances in the refrigerator/freezer (e.g.  
electric ice cream makers, mixers etc.).  
• Before cleaning the appliance, always switch off the appliance and  
disconnect from the electricity supply.  
• When unplugging always pull the plug from the mains socket, do not pull  
on the cable.  
Service  
• Under no circumstances should you attempt to repair the appliance your-  
self. Repairs carried out by inexperienced persons may cause injury or  
serious malfunctioning. Contact your local AEG Service Force Centre.  
Disposal  
Appliance Packaging Information  
All materials are environmentally sound.  
The plastics can be recycled and are identified as follows:  
>PE< for polyethylene, e.g. the outer covering and the bags in the interior.  
>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluo-  
rocarbon.  
The carton parts are made from recycled paper and should be disposed of  
at a waste-paper recycling collection location.  
5
 
Disposal of old Appliances  
For environmental reasons, refrigeration appliances must be disposed of  
properly. This applies to your old appliance, and - at the end of its service  
life - to your new appliance as well.  
Warning! Before disposing of old appliances make them inoperable.  
Remove plug from mains, sever the power cable, remove or destroy any  
snap or latch closures, to prevent small children being trapped inside.  
• Use an authorised disposal site.  
Contact your Local Council or Environmental Health Office to see if there  
are facilities in your area to recycle the appliance.  
The symbol  
on the product or on its packaging indicates that this pro-  
duct may not be treated as household waste. Instead it shall be handed over  
to the applicable collection point for the recycling of electrical and electro-  
nic equipment. By ensuring this product is disposed of correctly, you will  
help prevent potential negative consequences for the environment and  
human health, which could otherwise be caused by inappropriate waste  
handling of this product. For more detailed information about recycling of  
this product, please contact your local city office, your household waste  
disposal service or the shop where you purchased the product.  
Remove transport packaging  
The appliance and the interior fittings are protected for transport.  
• Remove all adhesive tape and packing pieces from the interior of the  
appliance.  
Shelf holders  
Your appliance is equipped with shelf  
retainers that make it possible to  
A
secure the shelves during transporta-  
tion.  
To remove them proceed as follows:  
Raise the shelf from the back, push it  
B
in the direction of the arrow until it  
is freed and remove the retainers.  
.
6
 
Starting up and temperature regulation  
Wash the inside of the appliance with lukewarm water with a little bicar-  
bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter-  
gent as the smell may linger. Dry the appliance thoroughly.  
• When the refrigerator compartment door is opened, the internal lighting  
is switched on. The temperature control knob is located on the right hand  
side of the refrigerator compartment.  
Setting “0”: Off.  
Setting “1”: Hightest temperature, (warmest setting).  
Setting “6” (end-stop) : Lowest temperature, (coldest setting).  
The exact setting should be chosen keeping in mind that the temperature  
inside the refrigerator depends on:  
-the quantity of food stored  
-how often the door is opened  
The temperatures in the refrigerator compartment and freezer compart-  
ment cannot be independently regulated.  
If you want to freeze fresh food rapidly, select setting “6”, ensuring that the  
temperature in the refrigerator compartment does not drop below 0°C. You  
should reset the temperature control knob to setting “3” or “4”, if this does  
occur.  
As soon as the fresh food placed in the freezer has frozen, return the tem-  
perature control knob to “3” or “4.  
Important!  
High ambient temperatures (e.g. on hot summer days) and a cold setting on  
the temperature regulator (position"5" to "6") can cause the compressor to  
run continuously.  
If this happens, turn the temperature control knob back to a warmer set-  
ting (position "3" to "4"). At this setting the compressor will be switched on  
and off as usual and automatic defrosting recommenced.  
7
 
Interior Accessories  
Storage Shelves  
The glass shelf above the fruit and  
vegetable compartment should  
always remain in position, to ensure  
fruit and vegetables stay fresh longer.  
The remaining storage shelves can be  
adjusted to various heights:  
D338  
Pull the storage shelf forward until it  
can be tipped up or down and remo-  
ved.  
To insert at a different height use the same procedure in reverse.  
Adjustment for tall goods:  
Remove the front half of the two-part vario glass storage shelf and insert it  
at a different level. Space is thus gained for storage of tall goods on the  
underlying storage shelf.  
Variable Inner Door  
The door compartments can be pulled up and removed, and inserted at  
other positions as needed.  
Fresh food refrigeration  
To obtain the best performance:  
• do not store warm food or evaporating liquid in the refrigerator  
• do cover or wrap the food, particularly if it has a strong flavour.  
• Position food so that air can circuiate freely round it.  
Useful hints:  
Meat (all types): wrap in polythene bags and place on the glass shelf above  
the vegetable drawer(s)  
For safety, store in this way only one or two days at the most.  
Cooked foods, cold dishes, etc: these should be covered and may be placed  
on any shelf.  
Fruit and vegetables: these should be thoroughly cleaned and placed in the  
special drawer(s) provided.  
8
 
Butter and cheese: these should be placed in special airtight containers or  
wrapped in aluminium foil or polythene bags to exclude as much air as pos-  
sible.  
Milk bottles: these should have a cap and should be stored in the bottle  
rack on the door.  
Bananas, potatoes, onions and garlic, if not in airtight containers, must  
not be kept in the refrigerator.  
Freezing and storing frozen food  
You can use your freezer for freezing fresh food yourself.  
Important!  
• The temperature in the freezer compartment must be –18 °C or colder  
before freezing food.  
• Please observe the freezing capacity given on the rating plate. The free-  
zing capacity is the maximum quantity of fresh food that can be frozen  
within a period of 24 hours. If you wish to freeze food several days in a  
row, please observe a maximum capacity of only 2/3 to 3/4 of that on the  
rating plate. The quality of the food is best preserved when it is frozen  
right through to the core as quickly as possible.  
• Allow warm food to cool down before freezing. The warmth will cause  
increased ice formation and increase the power consumption.  
• Please note the maximum storage times specified by the manufacturer.  
• Thawed foods which have not been processed further (cooked into meals)  
may not under any circumstances be frozen a second time.  
• Containers with flammable gases or liquids can leak at low temperatures.  
There is a risk of an explosion! Do not store any containers with flamma-  
ble materials such as, for example, spray cans, fire extinguisher refill car-  
tridges etc in the refrigerator/freezer.  
• Bottles and cans must not be placed in the freezer. They can burst when  
the contents freeze, high carbonate content drinks can even explode!  
Never store lemonade, juices, beer, wine, sparkling wine etc. in the freezer.  
• All foods must be packed air tight prior to freezing, so that they do not  
dry out or lose their flavour, and so that no flavour contamination of  
other frozen goods occurs.  
Important! Do not touch frozen food with wet hands. Your hands could  
stick to the food.  
9
 
1.  
2.  
Place the packed food in the drawers. Place food to be frozen in the upper  
drawer. Unfrozen food must not touch items already frozen, otherwise the  
frozen food could begin to defrost.  
Place frozen foods in the drawers sorted by type, as far as possible. Index  
tabs are supplied for placing on drawers. To mark the contents of the indi-  
vidual drawers, press the index tab over the corresponding symbol (see "Fro-  
zen Food Symbols/Freezer Calendar" section). This will give you a better  
overview of the contents, avoid extended door opening and therefore save  
electricity.  
Preparation of Ice Cubes  
1.  
Fill the ice cube tray 3/4 full with cold water, place it in the freezer com-  
partment and leave to freeze.  
2.  
To loosen the frozen cubes, either twist the ice cube tray or hold it under  
running water for a few seconds.  
Important! Never try to free an ice tray that is frozen to the freezer com-  
partment using pointed or sharp edged objects. Use the ice scraper supplied.  
Defrosting  
Refrigerator  
Frost is automatically eliminated from the evaporator of the refrigerator  
compartment every time the motor compressor stops, during normal use.  
The defrost water drains out through a trough into a special container at  
the back of the appliance, located over the motor compressor, where it  
evaporates.  
Freezer  
The freezer compartment, however, will become progressively covered with  
frost. This should be removed with the special plastic scraper provided,  
whenever the thickness of the frost exceeds 4 mm. During this operation it  
is not necessary to switch off the power supply or to remove the foodstuffs.  
However when the ice becomes very thick on the inner liner, complete  
defrosting should be carried out as follows:  
1.  
2.  
3.  
Remove the frozen food from the freezer, wrap it in several layers of new-  
spaper and put it in a very cool place.  
Switch off the appliance and pull out the plug or turn the temperature  
selector to “0” OFF.  
Leave the freezer compartment door open.  
10  
 
4.  
Turn the thermostat knob to the required setting and replace the plug in the  
power socket.  
Warning!  
Never use metal tools to scrape off the frost  
Do not use a mechanical device or any artificial means to speed up the  
thawing process other than those recommended by the manufacturer.  
A temperature rise of the frozen food packs, during defrosting, may shor-  
ten their safe storage life.  
Switching off the appliance  
To switch off the appliance, turn the temperature regulator to position "0"  
or disconnect from the electricity supply.  
If the appliance is not going to be used for an extended period:  
1.  
2.  
3.  
Remove all refrigerated and deep-frozen packages as well as ice trays.  
Remove the mains plug or switch off.  
Defrost freezer compartment and clean thoroughly (see section: “Cleaning  
and Care”).  
4.  
Leave the door open to avoid the build up of odours.  
Cleaning and Care  
For hygienic reasons the appliance interior, including interior accessories,  
should be cleaned regularly.  
Warning!  
Before carrying out any cleaning or maintenance, disconnect the appliance  
from the electricity supply.  
• Never clean the appliance with a steam cleaner. Moisture could accumu-  
late in electrical components, which could cause an electrical shock! Hot  
vapours can lead to the damage of plastic parts.  
• The appliance must be dry before it is placed back into service.  
Warning!  
• Ethereal oils and organic solvents can attack plastic parts, e.g.  
– lemon juice or the juice from orange peel,  
– butyric acid;  
11  
 
– cleansers which contain acetic acid.  
Do not allow such substances to come into contact with appliance parts.  
• Many proprietary kitchen surface cleaners contain chemicals that can  
attack/damage the plastics used in this appliance. For this reason it is  
recommended that the outer casing of this appliance is only cleaned with  
warm water with a little washing-up liqiud added.  
1.  
Remove frozen food and the food from the refrigerator. Wrap frozen  
food in several layers of newspaper. Store it in a cool place, well covered.  
2.  
3.  
Switch the appliance off and remove the plug from the mains, or switch off.  
Clean the appliance and the inte-  
rior accessories with lukewarm  
water and with a little bicarbonate  
of soda added (5ml to 0,5 litre of  
water).  
4.  
5.  
Dry the appliance thoroughly.  
Check the water drain hole on the  
rear wall of the fridge. Clear a  
blocked drain hole with the aid of  
the drain cleaning tool included  
with the appliance.  
6.  
When everything is dry place the  
appliance back into service.  
D037  
Energy Saving Tips  
• Do not install the appliance near radiators or other sources of continuous  
warmth. High ambient temperatures cause longer, more frequent opera-  
tion of the compressor.  
• Ensure sufficient air circulation at the appliance base and at the back wall  
of the appliance. Never cover air vent openings.  
• Do not place warm foods into the appliance. Allow warm foods to cool  
first.  
• Do not leave the door open any longer than necessary.  
• Do not set temperature any colder than necessary.  
• Put frozen food in the fridge to defrost. The cold in the frozen food will  
then be used to cool the fridge.  
12  
 
Something Not Working  
If the appliance is not functioning correctly, please carry out the following  
checks before contacting your local AEG Service Force Centre.  
Warning!  
Repairs should only be carried out by qualified service engineers. Repairs  
carried out by inexperienced persons may cause injury or serious malfunc-  
tioning.  
Symptom  
Possible Cause  
Remedy  
Appliance is not switched on Switch on the appliance.  
Mains plug is not plugged in  
Insert mains plug.  
or is loose.  
Appliance does not work.  
Check fuse, replace if neces-  
Fuse has blown or is defective.  
sary.  
Electrical malfunctions are to  
Socket is defective.  
be corrected by an electrician.  
Turn the temperature control  
knob to a warmer setting.  
Please look in the "Initial Start  
Up" section.  
Appliance cools too much.  
The food is too warm.  
Temperature is set too cold.  
Temperature is not properly  
adjusted.  
Door was open for an exten- Only open the door as long as  
ded period.  
necessary.  
A large quantity of warm food  
was placed in the appliance  
within the last 24 hours.  
The appliance is near a heat  
source.  
Turn the temperature control  
knob to a colder setting.  
Please look in the "Installation  
location" section.  
Please look in the "Changing  
the Light Bulb" section.  
Interior lighting does not work. Light bulb is defective.  
Carefully warm the leaking  
sections of the door seal with  
a hair dryer (not hotter than  
approx. 50 °C). At the same  
time shape the warmed door  
seal by hand until it sits cor-  
rectly.  
Heavy build up of frost, possi- Door seal is not air tight (pos-  
bly also on the door seal.  
sibly after reversing the door).  
The compressor does not start This is normal, no error has  
The compressor starts after a  
period of time.  
immediately after changing  
the temperature setting.  
occurred.  
Water on the floor or on sto- Water drain hole is blocked.  
rage shelves.  
See the "Cleaning and Care"  
section.  
13  
 
If, after carrying out the necessary checks there is still a fault with your  
appliance please contact your local AEG Service Force Centre.  
In guarantee customers should ensure that the suggested checks have  
been made as the engineer will make a charge if the fault is not a  
mechanical or electrical breakdown.  
Please note that proof of purchase is required for any in-guarantee service  
calls.  
Changing the light bulb  
Warning! There is a risk of electric shocks! Before changing the light  
bulb, switch off the appliance and unplug it. Light bulb data: 220-240 V,  
max. 15 W  
1.  
To switch off the appliance, turn the  
temperature control knob to position  
"0".  
2.  
3.  
Unplug the mains plug.  
To change the light bulb, remove the  
screw from the light bulb cover.  
4.  
Unhook the light bulb cover as  
shown.  
5.  
6.  
Change the defective light bulb.  
Refit the light bulb cover and the  
screw.  
AEG65  
7.  
Put the refrigerator back into operation.  
14  
 
Service and Spare Parts  
In the event of your appliance requiring service, or if you wish to purchase  
spare parts, please contact your local Service Force Centre by telephoning:  
0870 5 929929  
Your telephone call will be automatically routed to the Service Force Cen-  
tre covering your post code area.  
For address of your local Service Force Centre and further information  
Before calling out an engineer, please ensure you have read details under  
the heading “Something Not Working.  
When you contact the Service Force Centre you will need to give following  
details:  
1.Your name, address and post code  
2.Your telephone number  
3.Clear and concise details of the fault  
4.The model and serial number of the appliance. (found on the rating pla-  
te).  
5.The purchase date  
Please note that a valid purchase receipt or guarantee documentation is  
required for in-guarantee service calls.  
Customer Care Department  
For general enquiries concerning your AEG appliance or for futher  
information on AEG products, please contact our Customer Care  
Department by letter or telephone at the address below or visit our  
Customer Care Department  
Major Appliances  
AEG Domestic Appliances  
Addington Way  
Luton  
Bedfordshire  
LU4 9QQ  
Tel: 08705 350 350*  
*calls to this number may be recorded for training purposes  
 
15  
Guarantee Conditions  
Guarantee Conditions  
AEG offer the following guarantee to the first purchaser of this appliance.  
1. The guarantee is valid for 12 months commencing when the appliance is handed over to  
the first retail purchaser, which must be verified by purchase invoice or similar documen-  
tation.  
The guarantee does not cover commercial use.  
2. The guarantee covers all parts or components which fail due to faulty workmanship or  
faulty materials. The guarantee does not cover appliances where defects or poor perfor-  
mance are due to misuse, accidental damage, neglect, faulty.installation, unauthorised  
modification or attempted repair, commercial use or failure to observe requirements and  
recommendations set out in the instruction book.  
This guarantee does not cover such parts as light bulbs, removable glassware, or plastic.  
3. Should guarantee repairs be necessary the purchaser must inform the nearest customer  
service office (manufacturer’s service or authorised agent). AEG reserves the right to sti-  
pulate the place of the repair (i.e. the customer’s home, place of installation or AEG work-  
shop).  
4. The guarantee or free replacement includes both labour and materials.  
5. Repairs carried out under guarantee do not extend the guarantee period for the applian-  
ce. Parts removed during guarantee repairs become the property of AEG.  
6. The purchaser’s statutory rights are not affected by this guarantee.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you  
to your new home subject to the following qualifications:  
- The guarantee starts from the date you first purchased your product.  
- The guarantee is for the same period and to the same extent for labour and parts as exist  
in the new country of use for this brand or range of products.  
- This guarantee relates to you and cannot be transferred to another user.  
- Your new home is within the European Community (EC) or European Free Trade Area.  
- The product is installed and used in accordance with our instructions and is only used  
domestically, i.e. a normal household.  
- The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care Centre, listed below, to give  
them details of your new home. They will then ensure that the local Service Organisation is  
aware of your move and able to look after you and your appliances.  
France  
Germany  
Italy  
Sweden  
UK  
Senlis  
+33 (0)3 44 62 29 29  
+49 (0) 800 234 7378  
+39 (0) 800 117 511  
+46 (0) 8 672 53 60  
+44 (0) 8705 350 350  
Nürnberg  
Pordenone  
Stockholm  
Luton  
16  
 
Installation  
Electrical Connection  
Any electrical work required to install this appliance should be carried  
out by a qualified electrician or competent person.  
WARNING – THIS APPLIANCE MUST BE EARTHED  
The manufacturer declines any liability should these safety measures not  
be observed.  
Before switching on, make sure the electricity supply voltage is the same as  
that indicated on the appliance rating plate. The rating plate is inside, on the  
left.  
The appliance is supplied with a 13 amp plug fitted. In the event of having  
to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362)  
fuse must be used.  
Important!  
GREEN & YELLOW  
13 AMP. FUSE  
The wires in the mains lead are  
coloured in accordance with the fol-  
lowing code:  
Green and Yellow Earth  
Blue  
Brown  
Neutral  
Live  
As the colours of the wires in the  
mains lead of this appliance may not  
correspond with the coloured mark-  
ings identifying the terminals in your  
plug, proceed as follows:  
BROWN  
BLUE  
CORD CLAMP  
D207  
1.  
The wire coloured green and yellow must be connected to the terminal  
marked with the letter “E” or by the earth symbol or coloured green and yel-  
low.  
2.  
3.  
4.  
The wire coloured blue must be connected to the terminal marked “N” or  
coloured black.  
The wire coloured brown must be connected to the terminal marked “L” or  
coloured red.  
Upon completion there must be no cut, or stray strands of wire present and  
the cord clamp must be secure over the outer sheath.  
Warning! A cut-off plug inserted into a 13 amp socket is a serious safety  
(shock) hazard. Ensure that the cut-off plug is disposed of safely.  
17  
 
Positioning  
This appliance should only be installed at a location where the ambient  
temperature corresponds to the climate classification indicated on the rat-  
ing plate, which is located on the inside left of the appliance.  
The following table shows which ambient temperature is correct for each  
climate classification.  
Climate classification  
for an ambient temperature of  
SN  
N
+10 to +32 °C  
+16 to +32 °C  
The appliance should be located in a dry atmosphere, out of direct sunlight  
and away from continuous heat and extreme temperature, e.g. not next to  
a boiler or radiator, or in a very cold room e.g. an outhouse. If these tem-  
peratures are exceeded i.e. warmer or colder, then the appliance may not  
operate correctly.  
For building-in and door reversal instructions please refer to the relevant  
instructions on the following pages.  
Your appliance needs air  
min.  
50 mm  
200 cm2  
For safety reasons, minimum ventila-  
tion must be as shown Fig.  
Attention: keep ventilation openings  
clear of obstruction;  
min.  
200 cm  
2
D567  
Housing dimensions  
Height  
Depth  
Width  
1780 mm  
550 mm  
560 mm  
Reversing the door  
The side the door opens can be changed from the right side (factory adjust-  
ment) to the left side, if the installation site requires.  
Warning! When changing the side the door opens, the appliance must not  
be connected to the mains. Remove plug from the mains beforehand.  
18  
 
1.  
Unscrew the upper pin and remove  
the spacer  
2.  
3.  
Remove the door  
Refit the door, the upper pin and the  
spacer on the opposite side  
4.  
Unscrew the lower pin and remove  
the spacer and refit them on the  
opposite side.  
Inner door reversal  
1.  
Using a screwdriver release bracket  
(1) by pressing on the internal spring  
and withdraw it from its seat  
together with the door; remove plug  
(2) and fit it in the hole left open on  
the opposite side; turn the door  
through 180°, remove the bracket (1)  
and refit it on the opposite side.  
Refit the door and insert the top pin  
and bottom bracket (1), pushing it  
into place.  
180°  
2
1
2.  
PR14  
To ensure correct storage of food, the door is fitted with a simple spring  
device which holds it in the open position until it is properly closed.  
19  
 
Instructions for building-in  
Apply joint the sealing strip as shown  
in figure.  
D765  
An additional midpoint location  
bracket may be fitted to the appli-  
ance (as shown) to assist retention of  
the housing side wall.  
13mm  
Ø 2,5  
Drill the unit using a ³ 2,5 mm drill  
(10 mm max. penetration.  
Fix the square fitting (1) to the appli-  
ance.  
D740  
Fit the appliance in the niche by  
making sure that it stands against  
the interior surface of the unit on  
the side where the door hinges of  
the appliances are fitted. Insert the  
appliance until the upper strip butts  
up against the unit (1) and make  
sure that the lower hinge is in line  
with the surface of the unit (2).  
2
D022  
20  
 
Fasten the appliance with 4 screws  
provided in the kit included with the  
appliance. (I = short) - (P = long).  
I
P
Apply covers (C-D) into the relevant  
holes.  
Snap ventilation grille (B) and hinge  
cover (E) into position.  
C
D
E
B
Separate parts Ha,Hb, Hc, Hd as  
shown in the figure  
Hb  
Ha  
Hc  
Hd  
PR266  
21  
 
Place guide (Ha) on the inside part of  
the furniture door, as shown in the  
figure and mark the position of  
external holes. Having drilled the  
holes, fix the guide with the screws  
supplied.  
ca. 50 mm  
90°  
ca. 50 mm  
Fix cover (Hc) on guide (Ha) until it  
clips into place.  
Ha  
Hc  
Open the appliance door and the fur-  
niture door at 90°. Insert the small  
square (Hb) into guide (Ha). Put  
together the appliance door and the  
furniture door and mark the holes as  
indicated in the figure.  
Hb  
Remove the squares and drill holes  
with ø 2 mm at 8 mm from the out-  
er edge of the door. Place the small  
square on the guide again and fix it  
with the screws supplied.  
Hd  
PR167/1  
22  
 
Place the small square on the guide  
again and fix it with the screws sup-  
plied.  
Should adjustment of the furniture  
door be necessary, use the clearance  
slots.  
At the end of installation/adjusting, it  
is necessary to check if the door of  
the furniture closes properly.  
Hb  
PR168  
Fix cover (Hd) on guide (Hb) until it  
clips into place.  
Hb  
Hd  
PR167/1  
Regulations, Standards, Guidelines  
This appliance was designed for household use and was manufactured in  
accordance with the appropriate standards. The necessary measures in  
accordance with appliance safety legislation regulations (GSG), accident  
prevention regulations for refrigeration appliances (VBG 20) and the regu-  
lations of the German Society of Electrical Engineers (VDE) were observed in  
the manufacture of this appliance.  
The refrigerant circuit has been checked for leaks.  
This appliance is in accordance with the following EU guidelines:  
– 73/23/EWG dated 19 February 1973 - low voltage guidelines.  
– 89/336/EWG dated 3 May 1989  
(including guideline change notice 92/31/EWG) - EMV guideline  
To buy accessories, consumables and spare parts at our online shop please  
23  
 
2223 221-43-00-20122007 Subject to change without notice  
 

MTX Audio Stereo Amplifier Thunder4122 User Manual
Multiquip Mixer CX100HF User Manual
National Instruments Music Mixer cFP Al 110 User Manual
Nordyne Furnace Residential Gas Furnaces User Manual
Novatel Stereo System 600 G User Manual
Nvidia Computer Hardware GeForce Series User Manual
Omnitron Systems Technology Network Card iConverter 2FXM User Manual
Omron Thermostat V022 E3 1 User Manual
Orbit Manufacturing Outdoor Timer 57912 User Manual
Pass Labs Car Amplifier XP 10 User Manual