Nilfisk ALTO Stereo Amplifier A5002 User Manual

User's Manual  
A500.2 DRAGONFLY  
DIGITAL POWER AMPLIFIER  
R
Version 1.5 February 2006  
English  
 
To avoid the risk of electric shock and  
damage, do not subject this product to  
any liquid/rain or moisture. Do not use this  
product when in close proximity to water.  
Servicing  
Refer all servicing to qualified service  
personnel only.  
Do not perform any servicing other than  
those instructions contained within the  
User's Manual.  
Do not install this product near any direct  
heat source.  
Do not block areas of ventilation. Failure  
to do so could result in fire.  
Keep product away from naked flames.  
IMPORTANT SAFETY INSTRUCTIONS  
Read these instructions  
Follow all instructions  
Keep these instructions. Do not discard.  
Heed all warnings.  
Only use attachments/accessories  
specified by the manufacturer.  
Power Cord and Plug  
Do not tamper with the power cord or plug.  
These are designed for your safety.  
Do not remove Ground connections!  
If the plug does not fit your AC outlet seek  
advice from a qualified electrician.  
Protect the power cord and plug from any  
physical stress to avoid risk of electric shock.  
Do not place heavy objects on the power  
cord. This could cause electric shock or fire.  
Cleaning  
When required, either blow off dust from  
the product or use a dry cloth.  
Do not use any solvents such as Benzol  
or Alcohol.  
For safety, keep product clean and free  
from dust.  
2
 
Preface  
Dear Customer,  
Thanks for choosing LTO A500.2 Amplifier and thanks for choosing one of the results  
Of LTO AUDIO TEAM job and researches.  
For our LTO AUDIO TEAM, music and sound are more than a job...are first of all  
passion and let us say...our obsession!  
We have been designing professional audio products for a number of years in cooperation  
with many of the world's major brands in audio field.  
The LTO line presents unparalleled analogue and digital products made by Musicians  
for Musicians in our R&D centers in Italy, Netherlands, United Kingdom and Taiwan.  
We provide you with world -class designs, while our software development teams continue  
.
to develop and impressive range of audio specific algorithms.  
Because we are convinced you are the most important member of LTO AUDIO TEAM  
and the one confirming the quality of our job, we would like to share with you our work  
and our dreams, pay attention to your suggestions and your comments. Following this  
idea we create our products and we will create the new ones! From our side, we guar-  
antee you and we will supply you also in future the best quality, and the best fruits of  
our continuous researches and the best prices.  
Our A500.2 Amplifier is the result of many hours of listening and tests involving Co-  
mMon people, area experts, musicians and technicians.  
Nothing else to add, but that we would like to thank all the people that made the LTO  
Amplifier a reality available to our customers, thank our designers and all the LTO  
Staff, there to make possible the realization of products containing our idea of music  
And sound and there to support you, our customers, in the best way, conscious that You  
are our best richness.  
Thank you very much.  
LTO AUDIO TEAM  
3
 
TABLE OF CONTENT  
1. INTRODUCTION ............................................................................................5  
2. FEATURES ....................................................................................................5  
3. CONTROL ELEMENTS .................................................................................5  
3.1 Front Panel  
3.2 Rear Panel  
4. TECHNICAL SPECIFICATION.......................................................................7  
5. WARRANTY....................................................................................................7  
4
 
1. INTRODUCTION  
The LTO A500.2 DRAGONFLY is D-class digital Power Amplifier with advanced  
features and great efficiency. It delivers tremendous power in a small space, providing  
high level performance even under the most demanding conditions. The amplifier  
contains two independent channels with separate AC transformer, power supplies and  
protection system. Each channel has independent protective circuitry against open  
circuit, short Circuit, mismatched loads and over temperature. Thanks to the use of  
selected and expensive components, the performance of A500.2 DRAGONFLY is  
worth much more than its price.  
2. FEATURES  
1.5U height and 1/2 rack space, stereo high power amplifier  
Fantastic audio quality even with extremely high volume levels  
Solid and durable, can be mounted into a cabinet  
User-controllable limiter  
2x480 Watts on 4 ohms (EIAJ)  
2x260 Watts on 8 ohms (EIAJ)  
2x245 Watts on 4 ohms (RMS)  
2 COMBO input connectors are compatible with balanced XLR and JACK  
Neutrik Speak-on connectors for outputs  
Front panel LED indicators for clip, limit, power on and signal  
Accurate level control  
Manufactured under QS9000, VDA 6.1 certified management system  
3. CONTROL ELEMENTS  
3.1 Front Panel:  
4
5
R
DRAGONFLY  
A500.2  
ON  
20  
20  
18  
22  
18  
22  
CLIP  
LIMIT  
SIG  
CLIP  
16  
12  
24  
26  
16  
12  
24  
26  
LIMIT  
SIG  
POWER ON  
6
28  
6
28  
-
30  
CH2  
-
30  
dB  
CH1  
dB  
OFF  
POWER  
1
2
3
6
5
 
Power LED  
1
This LED lights up when the unit is powered on.  
Power Switch  
2
3
Turn the unit on or off.  
Level Control for Channels 1 & 2  
Adjust the output signal level of respective channel.  
Clip LED  
4
When the LED lights up, it means the output level of signal is too high and it is  
time to reduce the signal level until clip LED turns off.  
Limit LED  
5
6
While the unit is limiting the output signal, the LED lights up.  
Signal LED  
When there are signals present in this unit, the LED lights up, or it will be off.  
3.2 Rear Panel:  
10  
7
9
AC INPUT  
Input: 210-240V 50/60Hz  
Fuse: T6.3AL 250V  
Power Consumption: 450W  
INPUT  
POWER OUTPUT  
Use only with  
a
250V fuse  
4
SPEAKER LOAD MIN.  
CH1  
LIMITER  
CH2  
LIMITER  
Apparaten skall anslutas till  
jordat uttag nar den ansluts  
till ett natverk  
OFF  
ON  
OFF  
ON  
CH.1  
CH.2  
8
11  
Input Connector  
7
8
These connectors connect the input signal of channel1 and channel 2 separately.  
Limiter Switch  
Set this switch of CHI or CH2 at "ON" position, once the output level is above  
maximum output level, the limiter begins, thus keeping consistent output level  
of respective channel to protect apparatus. If the switch is set at "OFF", the  
limiter doesn't work.  
6
 
Output Connector  
9
These NEUTRIK connectors are used to connect with your speakers.  
10  
AC Input  
Use it to connect your A500.2 DRAGONFLY to the supplied AC cord only. Please  
check the voltage in your country before attempting toconnect the unit with the  
main AC.  
11  
Fuse Holder  
The fuse can protect the AC supplies circuit of the equipment.  
CAUTION: if there is something wrong with the fuse or the fuse needs to  
change, use only the recommended fuse type as indica-ted in  
this unit. If the fuse continues to blow after replacing, discon-  
tinue using this unit before being repaired.  
4. TECHNICAL SPECIFICATION  
MODEL  
A500.2 DRAGONFLY  
20Hz [email protected]%THD, Stereo Mode  
8 ohms per channel(EIAJ)  
4 ohms per channel(EIAJ)  
4 ohms per channel(RMS)  
Input Sensitivity @4 ohms  
Controls  
260W  
480W  
245W (at THD 1%)  
+3dBu  
FRONT: Power switch, CH1 & CH2 LEVEL knobs  
REAR: CH1 & CH2 LIMITER  
Power-On: Green LED  
Clip: Red LED  
Indicators (per channel)  
Limit: Yellow LED  
Signal: Green LED  
Input: COMBO connector  
Connectors of each channel  
Output: NEUTRIK Speak-on connector  
190-240 Vac~50Hz / 95-120Vac~60Hz  
314W x 208.5D x 66.6H mm / 12.4" x 8.2" x 2.6"  
Power Supply  
Dimension  
Net Weight  
3.85 kg (8.49lb)  
5. WARRANTY  
1. WARRANTY REGISTRATION CARD  
To obtain Warranty Service, the buyer should first fill out and return the enclosed Wa-  
rranty Registration Card within 10 days of the Purchase Date.  
7
 
All the information presented in this Warranty Registration Card gives the manufac-  
turer a better understanding of the sales status, so as to purport a more effective and  
efficient after-sales warranty service. Please fill out all the information carefully and  
genuinely, miswriting or absence of this card will void your warranty service.  
2. RETURN NOTICE  
2.1 In case of return for any warranty service, please make sure that the product is  
well packed in its original shipping carton, and it can protect your unit from any  
other extra damage.  
2.2 Please provide a copy of your sales receipt or other proof of purchase with the  
returned machine, and give detail information about your return address and con-  
tact telephone number.  
2.3 Abrief description of the defect will be appreciated.  
2.4 Please prepay all the costs involved in the return shipping, handling and insu-  
rance.  
3. TERMS AND CONDITIONS  
3.1 LTO warrants that this product will be free from any defects in materials and/or  
workmanship for a period of 1 year from the purchase date if you have comple-  
ted the Warranty Registration Card in time.  
3.2 The warranty service is only available to the original consumer, who purchased  
this product directly from the retail dealer, and it can not be transferred.  
3.3 During the warranty service, LTO may repair or replace this product at its own  
option at no charge to you for parts or for labor in accordance with the right side  
of this limited warranty.  
3.4 This warranty does not apply to the damages to this product that occurred as the  
following conditions:  
Instead of operating in accordance with the user's manual thoroughly, any  
abuse or misuse of this product.  
Normal tear and wear.  
The product has been altered or modified in any way.  
Damage which may have been caused either directly or indirectly by another  
product / force / etc.  
Abnormal service or repairing by anyone other than the qualified personnel or  
technician.  
And in such cases, all the expenses will be charged to the buyer.  
3.5 In no event shall LTO be liable for any incidental or consequential damages.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above exclusion or limitation may not apply to you.  
3.6 This warranty gives you the specific rights, and these rights are compatible with  
the state laws, you may also have other statutory rights that may vary from state  
to state.  
8
 
SEIKAKU TECHNICAL GROUP LIMITED  
SEKAKU ELECTRON INDUSTRY (H.K.) CO., LTD.  
No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151, Taiwan  
email: [email protected] Fax: 886-4-22346757  
All rights reserved to ALTO. All features and content might be changed  
without prior notice. Any photocopy, translation, or reproduction of part of this  
c
manual without written permission is forbidden. Copyright  
2005 SEIKAKU GROUP  
NF02069-1.5  
 

Milwaukee Impact Driver 2653 20 User Manual
Milwaukee Stove 1500HT User Manual
MTD Yard Vacuum 241 670A User Manual
Multiquip Trash Compactor MQ62TDD User Manual
NAD Stereo Amplifier PP 3 User Manual
NordicTrack Treadmill NTL24821 User Manual
NuTone Vacuum Cleaner CV352 User Manual
Onkyo Car Video System DR 815 User Manual
Panasonic Camcorder AG DVX100 User Manual
Panasonic Network Card AW PB301 User Manual